Gel sealed Mini-pleat HEPA filter（Peripheral gel seals）
The two-component gel is poured into the liquid seal type HEPA filter , and this is used as an installation seal.
The two-component gel is poured into the liquid seal type HEPA filter , and
this is used as an installation seal. This seal form has high reliability and is
suitable for PAO dust detection on site. Mainly used in the end of 0.3μm clean
room and purification equipment in the pharmaceutical industry to control
particles and microorganisms larger than 0.3μm in the clean room or equipment
work area. There are two types of HEPA filter, side sealing and top sealing.
|
Frame |
Aluminum |
|
Spacers |
EVA |
|
Filter media |
Glass fiber |
|
Gasket |
Gel |
|
Operation conditions |
<80%/100%RH.40℃ |
|
Model |
Specification(W×H×D) |
Rated air volume(m3/h) |
Initial resistance(Pa) |
Weighting efficiency（PA） |
Effectiveness@MPPS |
|
CYWGB410.410-93H14 |
410×410×93 |
500 |
220 |
450 |
99.995%≤E<99.9995% |
|
CYWGB550.550-93H14 |
550×550×93 |
1000 |
|||
|
CYWGB650.650-93H14 |
650×650×93 |
1500 |
|||
|
CYWGB750.750-93H14 |
750×750×93 |
2000 |
Related products
-
Hob
Contact UsIt is used Can-making/Metal sheet Painting and Printing Ovens. According to the specifications of the printed and coated products, a large number of C-shaped buckles and rollers (made of specialized food grade imported materials) are installed on the inner bracket and edge ears of the wicket, allowing the sheet (aluminum plate) to dry and run in a separate state from the wicket, effectively avoiding the problem of dot shaped scratches and burns in the printed and coated products.
-
Fluoride Removal Agent
Contact UsThe fluoride removal agent is a kind of silica-based modified ecological material specially applied to remove fluorine from natural water
-
Metal sheet drying oven for can making
Contact UsThe oven is mainly used to dry the coating on the tin (or aluminum) sheet in the can making process. The entire line mainly consists of conveying, feeding devices, drying, cooling, and material collection and stacking.
-
JS-04 Low Viscosity Polymer Filtration Reducer
Contact UsJS-04 is the polymer fluid loss additive of amphoteric and temperature and salt resistance using redox initiator system by AM, AA, AMPS, SA and DMDAAC with water as solvent. DF-03 can reduce the filtration loss, improve the mud cake quality, has good ability of high temperature resistance, salt and calcium contamination resistance. DF-03 has low viscosity to mud system due to narrow molecular weight scale. It is especially suitable for freshwater, saltwater, seawater drilling and completion fluids. The recommend dosage is 3.0 – 7.0ppb.
Reviews
There are no reviews yet.