DPA Filter
The DPA Filter (Differential Pressure Absorption Filter) is a compact, high-efficiency filtration deviceused in fluid and gas systems to remove contaminants while maintaining optimal flow rates.
Features and applications:
DPA filter rolls is mainly used to collect spray paint mist during the painting process. With large DHC, double-layer construction, and progressively increasing density, it can effectively blocks the spread of overspray paint mist. The small diamond cell inside is characterized with high adsorption which can remove the overspray both at the air outlet system and on the painting equipment. The diamond cell with unique perforated design keeps unique and stable air flow, allows large amount of overspray collected for a long time. The finished product having good resilience is convenient for installation and replacement. It can be directly installed with curtains or made into bag or cassette filter for use.
Materials and operating conditions
|
Composition |
PET/PP fibers; Glassfiber; Cotton fibers |
|
Max. working temperature |
80°C |
|
Max. working Rel. Humidity |
100% |
Standard specifications
|
Type |
Dimension(mm) |
Average Arrestance |
Rated Velocity(m/s) |
Initial Resistance(Pa) |
Dust Holding Capacity(Kg/m2) |
|
DPA Roll |
0.75*25m*30mm |
≥ 99.8% |
2.5 |
12/250 |
28 |
Purpose: Effectively collecting overspray paint mist, powder-coatings, stains and adhesives.
Application scenarios: spray painting room, baking room, painting workshop, powder-coating lines.
Customized available: can be assembled into bag filters, or made into paint mist cassette filter by adding cardboard boxes.
Related products
-
NGB High Temperature-resistant 350℃ Separator HEPA Filter
Contact UsThe filter material is high temperature resistant ultra-fine glass fiber filter paper, and the separator is aluminum foil corrugated sheet.
-
Gel sealed Mini-pleat HEPA filter（top gel seals）
Contact UsThe two-component gel is poured into the liquid seal type HEPA filter , and this is used as an installation seal.
-
JS-04 Low Viscosity Polymer Filtration Reducer
Contact UsJS-04 is the polymer fluid loss additive of amphoteric and temperature and salt resistance using redox initiator system by AM, AA, AMPS, SA and DMDAAC with water as solvent. DF-03 can reduce the filtration loss, improve the mud cake quality, has good ability of high temperature resistance, salt and calcium contamination resistance. DF-03 has low viscosity to mud system due to narrow molecular weight scale. It is especially suitable for freshwater, saltwater, seawater drilling and completion fluids. The recommend dosage is 3.0 – 7.0ppb.
-
PP Rainwater Module 50T(Green)
Contact UsPP plastic modules are injection-molded from polypropylene. By enveloping the structure with a composite geotechnical membrane, the system can function as either a storage reservoir.
Reviews
There are no reviews yet.