PP Rainwater Module 35T(Black)
PP plastic modules are injection-molded from polypropylene. They can be interconnected to form an underground water storage tank.
PP Rainwater Module 35T(Black)
Model Number:XH-MK1000
Dimension:L*W*H=1000*500*500(mm)
Weight:9.2kg-10kg(1000*500*250 The weight of a single piece is
4.6kg-5.0kg)
The aforementioned weight excludes the side panels,which weight around
1.0kg
Compressive Strength:Vertical Compressive Strength 400kN/㎡,
Lateral Compressive Strength 120kN/㎡.
Porosity:95%
Support Column Wall Thickness:Small End 4.5mm,Large End 3.0mm
(Average Wall Thickness 3.75mm)
Established in 2013, Guangdong Xihai Rainwater Environment Technology Co., Ltd. is a National High-Tech Enterprise. We specialize in independent innovation of rainwater control and utilization technologies, delivering smart solutions for Sponge City and ecological urban construction.
Guided by a "people-first" approach and a focus on technological innovation, Xihai has become a leading innovator and specialized service provider in China's rainwater management industry. As our planet confronts severe challenges in water resources, water environment, and water safety, the Xihai team is committed to working together, innovating persistently, and scaling new heights to tackle these critical issues.
Related products
-
Waste liquid and waste gas incineration device
Contact UsThe furnace volume of the combined incinerator is based on the exhaust gas generated by incineration, the comprehensive residence time is ≥4s, the high-temperature (1100℃) incineration treatment is ≥1100℃, and the high-temperature section residence time is ≥2.5s to ensure the removal efficiency of organic matter.
-
Gel sealed Mini-pleat HEPA filter（top gel seals）
Contact UsThe two-component gel is poured into the liquid seal type HEPA filter , and this is used as an installation seal.
-
Hob
Contact UsIt is used Can-making/Metal sheet Painting and Printing Ovens. According to the specifications of the printed and coated products, a large number of C-shaped buckles and rollers (made of specialized food grade imported materials) are installed on the inner bracket and edge ears of the wicket, allowing the sheet (aluminum plate) to dry and run in a separate state from the wicket, effectively avoiding the problem of dot shaped scratches and burns in the printed and coated products.
-
Kssc-zh061k Wet Grinding Dust Collector
Contact UsIt is main applied to flammable, explosive and big spark metal dust.
The air with dust entries into dust collector through suction inlet section under the fan working status, the bigparticles will drop into water tank bottom.
Reviews
There are no reviews yet.