Fluoride Removal Agent
The fluoride removal agent is a kind of silica-based modified ecological material specially applied to remove fluorine from natural water
I. Technical principle
The fluoride removal agent is a kind of silica-based modified ecological
material specially applied to remove fluorine from natural water, with strong
fluorine fixing function. It can quickly fix fluorine in the water and form
extremely stable passivation; after sinking to the bottom of the water, it
combines with the substrate, continuously blocking the release of fluorine in
the substrate sediment to the water, and persistently passivating the substrate
without the risk of release.
|
Main structure |
Highly fluorophilic modified mineral |
|
Physical type |
1-3mm particles and powder |
|
Saturated adsorption capacity (dry basis) |
>80mg/g |
|
Optimum PH range |
6-7 |
|
Usage |
Direct placement, natural settling in 2-3 days |
2. Technical Characteristics
High performance: Stable control of fluoride ion concentration in natural
water below 1.0mg/L.
Fast speed: Fluorine concentration in the water will be obviously reduced
after 3-7 days of application.
Long-lasting effect: It can passivate the substrate, permanently fix the
fluorine released from the substrate, and form a stable mineral without
secondary release.
Safe and reliable: It is extracted from natural minerals and does not cause
ecological pollution of the water environment.
Related products
-
Hob
Contact UsIt is used Can-making/Metal sheet Painting and Printing Ovens. According to the specifications of the printed and coated products, a large number of C-shaped buckles and rollers (made of specialized food grade imported materials) are installed on the inner bracket and edge ears of the wicket, allowing the sheet (aluminum plate) to dry and run in a separate state from the wicket, effectively avoiding the problem of dot shaped scratches and burns in the printed and coated products.
-
Plastic to Pyrolysis Oil (COMY PTO™)
Contact UsThrough low-temperature and low-pressure catalytic pyrolysis and reforming processes, COMY converts waste plastics into pyrolysis oil(also referred to as COMY Oil).
-
NGB High Temperature-resistant 350℃ Separator HEPA Filter
Contact UsThe filter material is high temperature resistant ultra-fine glass fiber filter paper, and the separator is aluminum foil corrugated sheet.
-
Gel sealed Mini-pleat HEPA filter（Peripheral gel seals）
Contact UsThe two-component gel is poured into the liquid seal type HEPA filter , and this is used as an installation seal.
Reviews
There are no reviews yet.