Type 60 Mechanical Seal
Mediums:Water, oil and weakly-corrosivemediums
Working Conditions
Mediums: Water,oil and weakly-corrosive mediums
Temperature: -20℃ to 100℃
Pressure: ≤0.5MPa
Speed: ≤10m/s
Materials
Stationary Ring: Ceramic/Sic/TC
Rotary Ring : Carbon/Sic/TC
Secondary Seal: NBR/EPDM/Viton
Spring and Metal Part: Stainless Steel
Related products
-
Oblique Cut Lamination
Contact UsShearing is a common cutting method for silicon steel sheets. Silicon steel is sheared with a carbide blade, which can cut the required size and shape. Shear method on the thermal impact of silicon steel core is small, the kerf is smoother, but the shear force is more damage, easy to produce deformation and burr. Therefore, the shear method is suitable for cutting smaller lamination, the requirement of surface flatness is not too high occasions.
Our company has introduced advanced oblique cut equipment, which is able to cut large silicon steel core to meet more needs of customers. -
Deep Groove Ball Bearings
Contact UsDeep groove bearings are a widely used bearing type known for their simple design and excellent performance.
-
Full Shift Cylinder (Welding Type)
Contact UsWidely used for moving whole part of machines with low speed.
-
Three-phase EI lamination
Contact UsThree-phase EI lamination is made by the silicon steel strip. The model of three-phase EI lamination is from three-phase(20) to three-phase(100), and the hole size is from Φ4.5 to Φ14. The gap sizes o
Reviews
There are no reviews yet.