JZJ2B(S)W Series Roots Vacuum Pump Unit
The JZJ2B(S)W series Roots-liquid ring closed-loop vacuum unit utilizes a ZJ Roots pump as the main pump and a 2BV/2BE/2SK liquid ring vacuum pump or a Roots-liquid ring vacuum unit.
JZJ2B(S)W Series Roots Vacuum Pump Unit
I. Applications
The JZJ2B(S)W series Roots-liquid ring closed-loop vacuum unit utilizes a ZJ
Roots pump as the main pump and a 2BV/2BE/2SK liquid ring vacuum pump or a
Roots-liquid ring vacuum unit as the backing pump. It can be used not only to
extract general gases but also gases containing moisture and small amounts of
dust. Compared to conventional mechanical vacuum pumps, it is resistant to oil
contamination, moisture, and fine dust. It is an ideal vacuum extraction system
for drying, dehydration, and vacuum degassing in industries such as textiles,
food, chemicals, and pharmaceuticals. II. Features
1. The JZJ2B(S)W series Roots liquid ring vacuum units utilize the highly
efficient and energy-efficient 2BV liquid ring vacuum pump as their backing
pump. Consequently, the JZJ2B series Roots liquid ring vacuum units offer
advantages over the JZJ2SW series Roots liquid ring vacuum units, including
higher efficiency, compact structure, zero leakage (the 2BV series utilizes a
standard mechanical seal design, unlike the 2SK series' packing seal), corrosion
resistance (the 2BV series utilizes a stainless steel impeller), and a higher
level of protection.
2. The backing pump for Roots liquid ring vacuum units typically uses water
as the working fluid, but can also operate with organic solvents (such as
methanol, ethanol, xylene, and acetone) or other liquids. Using the backing pump
as a closed-loop system significantly reduces environmental pollution and
significantly improves organic solvent recovery. The ultimate vacuum level is
determined by the saturated vapor pressure of the working fluid.
Main Performance Parameters
|
Unit Model |
Pump Model |
Pumping Speed L/s |
Maximum Suction Inlet Pressure Pa |
Ultimate Pressure Pa (Absolute) |
Total Power KW |
||
|
Main Pump |
Foreline Pump |
Water Ring Unit |
Oil Ring Unit |
||||
|
JZJ2BW30-1 |
ZJ30 |
2BV5110 |
30 |
12000 |
267 |
80 |
4.75 |
|
JZJ2BW70-2 |
ZJ70 |
2BV5110 |
70 |
6000 |
5.5 |
||
|
JZJ2BW70-1 |
ZJ70 |
2BV5111 |
70 |
12000 |
7 |
||
|
JZJ2BW150-2A |
ZJ150 |
2BV5111 |
150 |
6000 |
8.5 |
||
|
JZJ2BW150-2B |
ZJ150 |
2BV5121 |
150 |
8000 |
10.5 |
||
|
JZJ2BW150-1 |
ZJ150 |
2BV5131 |
150 |
10000 |
14 |
||
|
JZJ2BW300-2A |
ZJ300 |
2BV5131 |
300 |
4000 |
15 |
||
|
JZJ2BW300-2B |
ZJ300 |
2BV5161 |
300 |
5000 |
19 |
||
|
JZJ2BW30-2.1 |
ZJ30 |
ZJ15, 2BV2061 |
30 |
8000 |
25 |
0.8 |
2.8 |
|
JZJ2BW70-2.1 |
ZJ70 |
ZJ30, 2BV5110 |
70 |
6000 |
6.25 |
||
|
JZJ2BW150-2.1 |
ZJ150 |
ZJ70, 2BV5111 |
150 |
6000 |
10 |
||
|
JZJ2BW150-4.1 |
ZJ150 |
ZJ30, 2BV5110 |
150 |
3000 |
7.75 |
||
|
JZJ2BW300-2.1 |
ZJ300 |
ZJ150, 2BV5131 |
300 |
5000 |
18 |
||
|
JZJ2BW300-2.2 |
ZJ300 |
ZJ150, 2BV5121 |
300 |
4000 |
14.5 |
||
|
JZJ2BW300-4.1 |
ZJ300 |
ZJ70, 2BV5111 |
300 |
2000 |
11 |
||
|
JZJ2BW600-4.1 |
ZJ600 |
ZJ150, 2BV5131 |
600 |
1500 |
19.5 |
||
|
JZJ2BW600-2.2 |
ZJ600 |
ZJ300, 2BV5161 |
600 |
2000 |
24.5 |
||
|
JZJ2BW1200-4.2 |
ZJ1200 |
ZJ300, 2BV5161 |
1200 |
1000 |
30 |
||
|
JZJ2BW30-2.1.1 |
ZJ30 |
ZJ15, ZJ15, 2BV2061 |
30 |
8000 |
0.5 |
0.05 |
3.35 |
|
JZJ2BW70-2.2.1 |
ZJ70 |
ZJ30, ZJ15, 2BV2061 |
70 |
4000 |
4.3 |
||
|
JZJ2BW70-2.1.1 |
ZJ70 |
ZJ30, ZJ30, 2BV5110 |
70 |
6000 |
7 |
||
|
JZJ2BW150-2.2.1 |
ZJ150 |
ZJ70, ZJ30, 2BV5110 |
150 |
3000 |
9.25 |
||
|
JZJ2BW300-2.2.1 |
ZJ300 |
ZJ150, ZJ70, 2BV5111 |
300 |
3000 |
14 |
||
|
JZJ2BW300-4.2.1 |
ZJ300 |
ZJ70, ZJ30, 2BV5110 |
300 |
1200 |
10.25 |
||
|
JZJ2BW600-2.2.1 |
ZJ600 |
ZJ300, ZJ150, 2BV5131 |
600 |
2500 |
23.5 |
||
|
JZJ2BW600-4.2.1 |
ZJ600 |
ZJ150, ZJ70, 2BV5111 |
600 |
1200 |
15.5 |
||
|
JZJ2BW1200-4.2.1 |
ZJ1200 |
ZJ300, ZJ150, 2BV5131 |
1200 |
1000 |
29 |
||
|
Unit Model |
Pump Model |
Pumping Speed L/s |
Maximum Suction Pressure Pa |
Ultimate Pressure Pa (Absolute) |
Total Power KW |
||
|
Water Ring Unit |
Oil Ring Unit |
||||||
|
Main Pump |
Foreline Pump |
||||||
|
JZJ2SW30-1 |
ZJ30 |
2SK-1.5 |
30 |
12000 |
267 |
80 |
4.75 |
|
JZJ2SW70-2 |
ZJ70 |
2SK-1.5 |
70 |
6000 |
5.5 |
||
|
JZJ2SW70-1 |
ZJ70 |
2SK-3 |
70 |
10000 |
9 |
||
|
JZJ2SW150-2 |
ZJ150 |
2SK-3 |
150 |
6000 |
10.5 |
||
|
JZJ2SW150-1 |
ZJ150 |
2SK-6 |
150 |
10000 |
18 |
||
|
JZJ2SW300-2 |
ZJ300 |
2SK-6 |
300 |
4000 |
19 |
||
|
JZJ2SW300-1 |
ZJ300 |
2SK-12 |
300 |
8000 |
26 |
||
|
JZJ2SW600-2A |
ZJ600 |
2SK-12 |
600 |
4000 |
27.5 |
||
|
JZJ2SW600-2B |
ZJ600 |
2SK-20 |
600 |
7000 |
42.5 |
||
|
JZJ2SW70-2.1 |
ZJ70 |
ZJ30, 2SK-1.5 |
70 |
6000 |
25 |
0.8 |
6.25 |
|
JZJ2SW150-2.1 |
ZJ150 |
ZJ70, 2SK-3 |
150 |
6000 |
12 |
||
|
JZJ2SW300-2.1 |
ZJ300 |
ZJ150, 2SK-6 |
300 |
5000 |
twenty two |
||
|
JZJ2SW600-2.1 |
ZJ600 |
ZJ300, 2SK-12 |
600 |
4000 |
31.5 |
||
|
JZJ2SW150-4.1 |
ZJ150 |
ZJ30, 2SK-1.5 |
150 |
3000 |
7.75 |
||
|
JZJ2SW300-4.1 |
ZJ300 |
ZJ70, 2SK-3 |
300 |
2000 |
13 |
||
|
JZJ2SW600-4.1 |
ZJ600 |
ZJ150, 2SK-6 |
600 |
1500 |
23.5 |
||
|
JZJ2SW1200-4.1 |
ZJ1200 |
ZJ300, 2SK-12 |
1200 |
1000 |
37 |
||
|
JZJ2SW300-4.2.1 |
ZJ300 |
ZJ70, ZJ30, 2SK-1.5 |
300 |
1200 |
0.5 |
0.05 |
10.25 |
|
JZJ2SW600-4.2.1 |
ZJ600 |
ZJ150, ZJ70, 2SK-3 |
600 |
1200 |
17.5 |
||
|
JZJ2SW1200-4.2.1 |
ZJ1200 |
ZJ300, ZJ150, 2SK-6 |
1200 |
1000 |
33 |
||
|
JZJ2SW2500-4.2.1 |
ZJ2500 |
ZJ600, ZJ300, 2SK-12 |
2500 |
1000 |
53.5 |
||
Related products
-
MA-(2~8MM)×1800MM Steel Coil Slitting Line
Contact UsMA-(2~8MM)×1800MM Steel Coil Slitting Line is mainly composed by the following components : uncoiler, guiding device
-
FSH-FMI2020-B Standard Single/Double Channel Fluid Injection
Contact UsFSH – FMI2020 – B standard series of high-precision fluid dispensing / refilling system consists of a digital control box, stepper motor and one to two high precision rotary ceramic pump modules driven by step motor.
-
3MG132G CNC automatic track grinder for ball bearing inner ring
Contact UsType: high precision bearing grinder
Abrasives: diamond wheel
Controlling Mode: CNC
Processing Mode: fully automatic
Precision: high precision
Certification: GS, CE, ISO 9001
Customisation: upon request
Place of Origin: Wuxi, China
Machining Accuracy Grade: P4/P5
External Dimensions: 2070mm*1320mm*1880mm
MOQ: 1 set
DM: 3 months
Packaging: three-ply board -
Waste plastic or Modified PE Pelletizing
Contact UsThe waste plastic or modified PE material is fed into the machine through a hopper. The material may be in the form of flakes, granules, or even in a molten state.






Reviews
There are no reviews yet.